21
English
6. OPERATION
• When starting the engine, place
the machine on the ground and
hold it securely. Since the blade
might touch the ground or
object near the machine, do not
start the engine while holding
up the machine with one hand.
• Do not start the engine with the
throttle lever kept pulled
because the blade will
immediately begin to move
upon starting the engine. When
starting the engine, place the
machine on a flat and firm
place, and keep all objects away
from the blade.
• When starting the engine, keep
all objects away from the
machine so that the blade does
not touch the ground.
• If the blade continues to rotate
even after the throttle lever is
returned to the idling position,
stop the engine and check the
idling adjustment screw of the
throttle wire and the carburetor.
• When the engine has started,
make sure that the blade does
not move. If the blade continues
to move, stop the engine, and
check the idling adjustment
screw of the throttle wire and
the carburetor.
• While using the machine, hold
the grips of the machine with
both hands, and keep your eyes
on the blade.
• Do not touch the metal part of
the engine body and the muffler
while using the machine or
immediately after stopping
using it, otherwise you might
suffer burns.
• Do not touch the spark plug or
plug cord while using the
machine, otherwise you might
suffer an electric shock.
If you repeat the starting operation
with the choke closed, the electrode
of the spark plug may become wet
and the engine might not start. If this
happens, open the choke, set the
throttle lever to the almost fully-open
position and pull out the starter rope
repeatedly, or try the starting
operation again after removing the
spark plug and drying the electrode.
IMPORTANT
주십시오.
는지를 확인해 주십시오. 칼날이 계
오.
시오.
의 금속부를 만지지 마십시오.
러그 코드를 만지지 마십시오.
엔진이 걸리지 않을 수 있습니다.
주십시오.
