■ SHOULDERING THE MAIN
BODY OF THE UNIT
1. Start the engine and allow it to
warm up. Then, return the throttle
lever to the idling position, and
make sure that the blade does not
rotate.
2. Make sure that there is no person
or object near the machine. Then,
holding the front part (on the blade
side) of the handle of the main
pipe with your left hand, hang the
right shoulder belt on your right
shoulder.
3. Shift the main pipe from the left
hand to the right hand, and hang
the left shoulder belt on your left
shoulder.
4. Adjust the length of the left and
right shoulder belts so that the
shoulder frame is a little above the
waist, and the weight of the main
body of the machine is applied
evenly on both shoulders.
5. Use of the hanging belt (an
accessories) allows you to work
comfortably without your arms
becoming tired. Hook the hanging
belt in the left or right shoulder belt
and the hanger plate in which the
loop handle is mounted, and
adjust the length of the ganging
belt to an easy-to-use length.
(1) Method of adjusting the length
of the belt.
(2) To shorten the belt:
(3) Pull down the end of the belt.
(4) To lengthen the belt:
(5) Pull up the lower end of the
buckle.
