■ WHEN USING A METAL BLADE
• Swing the blade from right to left to
cut grass.
• To cut usual grass, use the part of
the blade corresponding to 1/2 of
the diameter of the blade. To cut
tough weeds such as Japanese
pampas grass and Solidago
altisima, use the part of the blade
corresponding to 1/3 of the
diameter of the blade.
• Adjust the rotation speed of the
engine in accordance with the
resistance of grass. Cut young
grass at middle speed, and cut
tough and thick grass such as
Japanese mugwort and vines at
high speed.
Operating the engine at low speed
might cause grass, weeds or twigs to
be caught up in the blade. It also
wears down the clutch more quickly.
IMPORTANT
칼날은 작업용도에 맞추어 적절한 것을 선택해 주십시오.
자세한 것은 각각 칼날에 첨부된 설명서를 읽어 주십시오.
Select an appropriate blade to suit the material being cut.
For details, refer to the operating manual supplied with each blade.
OP9
OP8
(1) Usable area of the blade
(2) Area to be used for cutting young grass
(3) Area to be used for cutting tough grass
■ SELECTION OF BLADE
•When cutting branches and plants, always use a saw blade, and
never use an eight-tooth blade or a four-tooth blade.
• If you cut grass and plants with the wrong type or size of blade,
the blade might damage the shaft and external pipe of this
machine.
