33
English
7. MAINTENANCE
■ GEAR CASE
Supply lubricating grease to the gear
case every 25 hours of use.
Designated grease
Lithium-based heat-resistant grease
(#2)
[How to supply grease]
1. Remove the blade and the blade
rest plate.
2. Remove the plug beside the gear
case, and pour tube grease from
the plug hole.
3. Stop supplying the grease when
all the old grease has been
pushed out from the shaft
connecting hole on the side where
the main pipe is installed, and
mount the plug in its original
position.
4. Wipe off the pushed-out grease,
and mount the blade and the blade
rest plate in their original positions.
(1) Plug
(2) Blade rest plate
■ FLEXIBLE SHAFT
Apply grease to the flexible shaft
every 25 hours use.
1. Take out the flexible shaft while
raising the stopper of the clutch
housing.
2. Take out the inner shaft, apply
grease to the surface of the inner
shaft, and insert the inner shaft
into the liner.
Designated grease
Lithium-based heat-resistant grease
(#2)
(1) Stopper
(2) Liner
(3) Inner shaft
(4) Grease
(5) Liner
