Chapter 45 Introducing Commands
ES-4124 User’s Guide
340
cable-
diagnostics
<port-list> Perform a physical wire-pair test
of the Ethernet connections on
the specified port(s).
13
clear arp inspection filter Delete all ARP inspection filters
from the Switch.
13
arp inspection log Delete all ARP inspection log
entries from the Switch.
13
arp inspection statistics Delete all statistics records of
ARP packets going through the
Switch.
13
arp inspection statistics vlan
<vlan-list>
Delete statistics records of ARP
packets going through the Switch
for the specified VLAN(s).
13
dhcp snooping
database
statistics Delete all statistics records of
DHCP requests going through
the Switch.
13
loopguard Clear loopguard counters. 13
configure Accesses Configuration mode.
See Section 45.12.3 on page
349.
13
copy running-config
tftp <ip>
<remote-file>
Backs up running configuration to
the specified TFTP server with
the specified file name.
13
running-config
interface port-
channel <port>
<port-list>
Clones (copies) the attributes
from the specified port to other
ports.
13
running-config
interface port-
channel <port>
<port-list>
[bandwidth-limit
....]
Copies the specified attributes
from one port to other ports.
13
tftp config <index>
<ip> <remote-
file>
Restores configuration with the
specified filename from the
specified TFTP server to the
specified configuration file on the
router.
13
flash <ip>
<remote-file>
Restores firmware via TFTP. 13
disable Exits Enable (or privileged)
mode.
13
enable
Accesses Enable (or privileged)
mode. See Section 45.12.2 on
page 339. Enable the highest
privilege level for executing
commands.
0
<0-14> Accesses Enable mode
commands up to the privilege
level specified. See Section
45.12.2 on page 339.
0
Table 140 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
