Chapter 45 Introducing Commands
ES-4124 User’s Guide
349
45.12.3 General Configuration Mode
The following table lists the commands in Configuration (or Config) mode.
[command </>] Connects to an SSH server with
the specified SSH version and
addition commands to be
executed on the server.
0
test interface port-
channel <port-
list>
Performs an internal loopback
test on the specified ports.
13
traceroute <ip|host-name>
[in-band|out-of-
band|vlan <vlan-
id>][ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet
takes to a device.
0
help Displays help information for this
command.
0
write memory Saves current configuration to the
configuration file the Switch is
currently using.
13
<index> Saves current configuration to the
specified configuration file on the
Switch.
13
Table 140 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
Table 141 Command Summary: Configuration Mode
COMMAND DESCRIPTION PRIVILEGE
aaa accounting commands
<privilege>
stop-only
tacacs+
Enables accounting of
command sessions and
specifies the minimum privilege
level for which command
sessions should be recorded.
13
commands
<privilege>
stop-only
tacacs+
[broadcast]
Enables sending accounting
information for command
sessions to all configured
accounting servers at the same
time.
13
dot1x <start-
stop|stop-only>
<radius|tacacs+
>
Enables accounting of IEEE
802.1x authentication sessions
and specifies the mode and
protocol method.
13
dot1x <start-
stop|stop-only>
<radius|tacacs+
> [broadcast]
Enables sending accounting
information for IEEE 802.1x
authentication sessions to all
configured accounting servers at
the same time.
13
exec <start-
stop|stop-only>
<radius|tacacs+
>
Enables accounting of
administrative sessions via
SSH, Telnet and console port
and specifies the mode and
protocol method.
13
