Chapter 45 Introducing Commands
ES-4124 User’s Guide
364
enable traps
system
<options>
Disables sending all system
type traps to a manager. The
options are “coldstart”,
“warmstart”, “fanspeed”,
“temperature”, “voltage”, “reset”,
“timesync”, “intrusionlock” or
“loopguard”.
13
spanning-tree Disables STP. 13
<port-list> Disables STP on listed ports. 13
ssh key
<rsa1|rsa|dsa>
Disables the secure shell server
encryption key. Your Switch
supports SSH versions 1 and 2
using RSA and DSA
authentication.
13
known-hosts
<host-ip>
Removes the specified remote
hosts from the list of all known
hosts.
13
known-hosts
<host-ip>
[1024|ssh-
rsa|ssh-dsa]
Removes remote known hosts
with the specified public key
(1024-bit RSA1, RSA or DSA).
13
storm-control Disables broadcast storm
control.
13
subnet-based-vlan Disables subnet based VLAN on
the Switch.
13
source-ip <ip>
mask-bits
<mask-bits>
Removes the specified subnet
from the subnet based VLAN
configuration.
13
dhcp-vlan-
override
Disables the DHCP VLAN
override setting for subnet
based VLAN(s).
13
syslog Disables syslog logging. 13
server <ip-
address>
Disables syslog logging to the
specified syslog server.
13
server <ip-
address>
inactive
Enables syslog logging to the
specified syslog server.
13
type [type] DIsables syslog logging for the
specified log type (
sys, link,
config, error or report).
13
tacacs-accounting <index> Disables TACACS+ accounting
on the specified server.
13
tacacs-server <index> Disables TACACS+
authentication on the specified
server.
13
time daylight-
saving-time
Disables daylight saving on the
Switch.
13
timesync Disables timeserver settings. 13
Table 141 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
