Chapter 45 Introducing Commands
ES-4124 User’s Guide
369
area <area-id>
virtual-link
<router-id>
name <name>
Sets a descriptive name for the
virtual link for identification
purposes.
13
exit Leaves the router OSPF
configuration mode.
13
network <ip-
addr/bits> area
<area-id>
Creates an OSPF area. 13
no area <area-
id>
Removes the specified area. 13
no area <area-
id>
authentication
Sets the area to use no
authentication (None).
13
no area <area-
id> default-
cost
Sets the area to use the default
cost (15).
13
no area <area-
id> stub
Disables stub network settings
in the area.
13
no area <area-
id> stub no-
summary
Sets the area to send LSAs
(Link State Advertisements).
13
no area <area-
id> virtual-
link <router-
id>
authentication-
key
Resets the authentication
settings on this virtual link.
13
no area <area-
id> virtual-
link <router-
id> message-
digest-key
Resets the authentication
settings on this virtual link.
13
no area <area-
id> virtual-
link <router-
id>
authentication-
same-as-area
Resets the authentication
settings on this virtual area.
13
no area <area-
id> virtual-
link <router-
id>
Deletes the virtual link from the
area.
13
no network <ip-
addr/bits>
Deletes the OSPF network. 13
no redistribute
rip
Sets the Switch not to learn RIP
routing information.
13
no redistribute
static
Sets the Switch not to learn
static routing information.
13
Table 141 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
