Chapter 45 Introducing Commands
ES-4124 User’s Guide
350
exec <start-
stop|stop-only>
<radius|tacacs+
> [broadcast]
Enables sending accounting
information for administrative
sessions via SSH, Telnet and
console port sessions to all
configured accounting servers at
the same time.
13
system
<radius|tacacs+
>
Enables accounting of system
events and specifies the
protocol method.
13
system
<radius|tacacs+
> [broadcast]
Enables sending accounting
information for system events to
all configured accounting
servers at the same time.
13
update periodic
<1-2147483647>
Sets the update period for
accounting sessions. This is the
time the Switch waits to send an
update to an accounting server
after a session starts.
13
authentication enable
<method1>
[<method2>
[<method3>]]
Enables authorization for
executing commands on the
Switch and specifies which
method should be used first
second and third. The methods
can be, “enable”, “radius” or
“tacacs+”
14
login <method1>
[<method2>
[<method3>]]
Enables authentication for
administrative sessions on the
Switch and specifies which
method should be used first
second and third. The methods
can be, “local”, “radius” or
“tacacs+”
14
admin-
password
<pw-string>
<confirm-string>
Changes the administrator
password.
14
arp
inspection
Enables ARP inspection on the
Switch. You still have to enable
ARP inspection on specific
VLAN and specify trusted ports.
13
filter-aging-time <1-2147483647> Specifies how long (1-
2147483647 seconds) MAC
address filters remain in the
Switch after the Switch identifies
an unauthorized ARP packet.
The Switch automatically
deletes the MAC address filter
afterwards.
13
none Specifies the MAC address filter
to be permanent.
13
Table 141 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
