Chapter 18 IP Source Guard
GS1510 Series User’s Guide
111
18.6.1 Filter Table
Use this screen to look at the current list of MAC address filters that were created
because the Switch identified an unauthorized ARP packet. When the Switch
identifies an unauthorized ARP packet, it automatically creates a MAC address
filter to block traffic from the source MAC address and source VLAN ID of the
unauthorized ARP packet.
To open this screen, click Security > IP Source Guard > ARP Inspection >
Filter Table.
Figure 58 Filter Table
Deselect All Click this to set all ports to untrusted.
Apply Click this to save any changes to the Switch.
Refresh Click this to reload the screen and reset any changes that were
just made.
ARP Inspection Status
ARP Inspection State This field displays the current status of the ARP Inspection
feature, Enabled or Disabled.
Enabled on VLAN This field displays the VLAN IDs that have ARP Inspection
enabled on them. This will display None if no VLANs have been
set.
Trusted Ports This field displays the ports which are trusted. This will display
None if no ports are trusted.
Table 32 ARP Inspection (continued)
LABEL DESCRIPTION
