Chapter 10 VLAN
GS1510 Series User’s Guide
68
10.6 Tag Settings
Use this screen to tag any outgoing frames from a port with its assigned VLAN ID.
You must first configure a VLAN (Section 10.5 on page 67) before using this
screen. Click Advanced Settings > VLAN > VLAN > Tag Settings to display
the following screen.
Figure 36 Tag Settings
The following table describes the labels in this screen.
Table 14 Tag Settings
LABEL DESCRIPTION
VLAN ID Select a VLAN ID to configure its port tagging settings.
Tag Port Selecting a port which is a member of the selected VLAN ID will make it a
tag port. This means the port will tag all outgoing frames transmitted with
the VLAN ID.
Select All Click Select All to mark all member ports as tag ports.
Deselect All Click Deselect All to mark all member ports as untag ports.
Apply Click this to save any changes to the Switch.
Refresh Click this to reload the screen and reset any changes that were just made.
Tag Status
VLAN ID This field displays the VLAN ID.
Tag Ports This field displays the ports that have been assigned as tag ports.
UnTag Ports This field displays the ports that have been assigned as untag ports.
