Chapter 12 IGMP Snooping
GS1510 Series User’s Guide
75
12.5 Port Settings
Click Advanced Applications > IGMP Snooping > Port Settings to open the
following screen. Use this screen to enable or disable immediate leave on ports.
When immediate leave is enabled on a port, the Switch removes a port from the
multicast table immediately when an IGMP leave report is received on that port.
Figure 40 IGMP Snooping Port Setting
The following table describes the labels in this screen.
IGMP Snooping
State
This field displays whether IGMP snooping is globally enabled or
disabled.
IGMP Snooping
VLAN State
This field displays VLANs on which the Switch is to perform IGMP
snooping. None displays if you have not enabled IGMP snooping on any
port yet.
Unknown
Mulitcast
Packets
This field displays whether the Switch is set to discard or flood unknown
mulicast packets.
Table 17 IGMP Snooping (continued)
LABEL DESCRIPTION
Table 18 IGMP Snooping Port Setting
LABEL DESCRIPTION
Immediate
Leave Ports
Select individual ports on which to enable immediate leave.
Use Select All or Deselect All to enable or disable immediate leave for all
ports.
Apply Click Apply to save your changes to the Switch.
Refresh Click Refresh to begin configuring this screen afresh.
