Chapter 8 Port Mirroring
GS1510 Series User’s Guide
56
The following table describes the labels in this screen.
Table 10 Port Mirroring
LABEL DESCRIPTION
State Select Enabled to turn on port mirroring or select Disabled to turn it off.
Monitor
to Port
Select the ports for which you want to monitor the traffic.
All Ports Settings in this field apply to all ports.
Use this field only if you want to make some settings the same for all ports.
Use this field first to set the common settings and then make adjustments on
a port-by-port basis.
Source
Port
This field displays the number of a port.
Mirror
Mode
Select Ingress, Egress or Both to only copy the ingress (incoming), egress
(outgoing) or both (incoming and outgoing) traffic from the source ports to
the port specified in the Monitor to Port field. Select Disable to not copy
any traffic from the source ports to the port specified in the Monitor to Port
field.
Apply Click Apply to save your changes back to the Switch.
Refresh Click Refresh to begin configuring this screen afresh.
