Chapter 18 IP Source Guard
GS1510 Series User’s Guide
113
To open this screen, click Security > IP Source Guard > Binding Table >
Static Entry Settings.
Figure 59 Static Entry Settings
The following table describes the labels in this screen.
Table 34 Static Entry Settings
LABEL DESCRIPTION
MAC Address Enter the source MAC address in the binding.
IP Address Enter the IP address assigned to the MAC address in the binding.
VLAN ID Enter the source VLAN ID in the binding.
Port Specify the port in the binding.
Apply Click this to create the specified static binding or to update an existing
one.
Refresh Click this to reload the screen and reset any changes that were just made.
No. This field displays a sequential number for each binding. Click it to update
an existing entry.
MAC Address This field displays the source MAC address in the binding.
IP Address This field displays the IP address assigned to the MAC address in the
binding.
Lease(hour) This field displays how long the binding is valid.
VLAN This field displays the source VLAN ID in the binding.
Port This field displays the port number in the binding.
Type This field displays how the Switch learned the binding.
Static: This binding was learned from information provided manually by
an administrator.
Dynamic: This binding was learned by snooping DHCP packets.
Action Click Delete to remove the specified entry.
