A SERVICE OF

logo

Open as PDF
next previous
Chapter 15 QoS
GS1510 Series User’s Guide
87
received port of the Switch. Click Advanced Settings > QoS > Port Priority to
open the following screen.
Figure 47 Port Priority
The following table describes the labels in this screen.
15.5 IP DiffServ (DSCP)
Use this screen to configure DSCP-based QoS settings. You can also use this
screen to decide whether to use Switch IEEE 802.1p priority or DSCPs for the
Table 22 Port Priority
LABEL DESCRIPTION
All Ports
802.1p
priority
Use this field to set a priority for all ports.
The value indicates packet priority and is added to the priority tag field of
incoming packets. The values range from 0 (lowest priority) to 7 (highest
priority).
Port This field displays the number of a port.
Priority Select a priority for packets received by the port. Only packets without a
802.1p priority tagged will be applied the priority you set here.
Apply Click Apply to save your changes back to the Switch.
Refresh Click Refresh to begin configuring this screen afresh.