A SERVICE OF

logo

Open as PDF
next previous
GS1510 Series User’s Guide
47
CHAPTER 6
General Settings
This chapter describes the General Settings screens in the Basic Settings menu.
6.1 What You Can Do
•Use the System screen (Section 6.2 on page 47) to configure the basic IP
address settings for the Switch.
•Use the Jumbo Frame screen (Section 6.3 on page 48) to configure the jumbo
frame size the Switch accepts.
•Use the SNTP screen (Section 6.4 on page 49) to configure the date and time of
the Switch.
6.2 System
Use the System Settings screen under Basic Settings > General Settings to set up
the IP address for the Switch. You can enable DHCP or set up a static IP address.
The following screen appears when you click Basic Settings > General Settings
> System.
Figure 26 System Settings