109
MSAP2000 AAMS User’s Guide
The following table describes the labels in this screen.
Table 38 Port Authentication: 802.1x
LABEL DESCRIPTION
RADIUS/Local Click this link to configure the RADIUS server or local profile settings.
Profile
Enable Select this check box to turn on IEEE 802.1x authentication on the
AAMS. Port This field displays a port number.
Enable Select this checkbox to turn on IEEE 802.1x authentication on this port.
Control Select Auto to authenticate all subscribers before they can access the
network through this port.
Select Force Authorized to allow all connected users to access the network
through this port without authentication.
Select Force Unauthorized to deny all subscribers access to the network
through this port.
Reauthentication Specify if a subscriber has to periodically re-enter his or her username
and password to stay connected to the port.
Reauthentication Specify how often a client has to re-enter his or her username and password
Period(s) to stay connected to the port.
Apply Click Apply to save your changes to the MSAP2000 AAMS’s volatile memory.
The MSAP2000 AAMS loses these changes if it is turned off or loses power, so
use the Config Save link on the navigation panel to save your changes to the
non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
