A SERVICE OF

logo

59
MSAP2000 AAMS User’s Guide
7.6 Default Settings
The default profile always exists and all of the ADSL ports use the default profile
settings when the MSAP2000 AAMS is shipped. The default profile's name is set
to DEFVAL. The default profile's maximum downstream rate can only be obtained
when using the G.dmt standard. Configure a profile with a maximum downstream
rate of 1536 Kbps or less for use with G.lite.
Refer to the chapter on initial configuration for the settings of the default profile and
ADSL port default settings.
7.7 xDSL Port Setup
Click Basic Setting and then xDSL Port Setup in the navigation panel to open
the following screen.
Figure 28 xDSL Port Setup