A SERVICE OF

logo

248
MSAP2000 AAMS User’s Guide
7 Type atur after the Enter Debug Mode message.
8 Wait for the Starting XMODEM upload message before activating XMODEM
upload on your terminal.
9 This is an example Xmodem configuration upload using HyperTerminal. Click
Transfer, then Send File to display the following screen.
Figure 153 Example Xmodem Upload
Type the firmware file's
location, or click
Browse to search for it.
Choose the 1K Xmodem
protocol.
Then click Send.
10After a successful firmware upload, type atgo to restart the MSAP2000
AAMS. The console port speed automatically changes back to 9600 bps
when the MSAP2000 AAMS restarts.