154
Sets the reboot timer or displays the
timer and remaining time for reboot.
If a reboot has been scheduled, use
cancel to prevent a reboot.
MSAP2000 AAMS User’s Guide
C HAPTER 25
Sys Commands
This chapter describes the commonly used commands that belong to the sys (system) group of
commands.
25.1 Sys Commands Summary
The following table lists the sys commands you can use with the MSAP2000
AAMS.
Table 59 Sys Commands
COMMAND DESCRIPTION
sys
info
show
Displays general system information.
hostname <hostname> Sets the system name.
location <location> Sets location information.
contact <contact> Sets contact person information.
passwd Sets the system’s
administrator password.
reboot [show|sec|can cel]
snmp
show
Displays SNMP settings.
getcommunity <community> Sets the SNMP GetRequest
community.
setcommunity <community> Sets the SNMP SetRequest
community.
trapcommunity <community> Sets the SNMP Trap community.
trustedhost <ip> Sets the SNMP trusted host. Set
0.0.0.0 to trust all hosts.
trapdst <ip>
[<port>]
Sets the SNMP trap server and listening port. Set 0.0.0.0 to not
send any SNMP traps.
server
show
Displays the device’s service status
and port numbers.
