190
Se
s an ADSL port(s)
o use an IGMP
filter profile.
Maps a priorit
level to a
physical queue.
MSAP2000 AAMS User’s Guide
C HAPTER 27
Switch Commands
This chapter describes how to configure some of the
switch commands.
27.1 Switch Commands Summary
The following table lists the switch commands you can use with the
MSAP2000 AAMS.
Table 61 Switch Commands
COMMAND DESCRIPTION
switch
igmpsnoop
show
Displays the IGMP snooping setting.
enable Turns on IGMP snooping.
disable Turns off IGMP snooping.
Igmpfilter
set [<port>|*]
<name>
show [portlist]
Displays which IGMP filter profile an
ADSL port(s) is using.
profile
set <name>
Configures an IGMP filter profile.
<index>
<startip>
<endip>
delete <name>
Removes an IGMP filter profile.
show [name] Displays an IGMP filter profile’s
settings.
queuemap
show
Displays the system’s priority level
to physical queue mapping.
<queue>
garptimer
show
Displays the GARP timer status.
join <join msec> Sets the GARP timer’s Join Timer.
leave <leave msec> Sets the GARP timer’s Leave Timer.
