8 Chapter 1 Troubleshooting control panel messages EN
Control panel messages
Alphabetical messages
ACCESS DENIED MENUS LOCKED
Appears for approximately 5 seconds when a user has attempted to
select a menu value while the printer control panel locking is enabled.
l See the system administrator for access to the printer control
panel.
BAD DUPLEXER CONNECTION
The duplex unit is not correctly installed.
1. Verify that the power cord is connected to the duplex printing
accessory and the short power cord from the duplex printing
accessroy is connected to the printer.
2. Turn printer off and then on.
3. If the error continues, verify that the duplex unit is correctly
installed.
If error persists, replace duplex unit.
CALIBRATION EXECUTING
The printer is executing an internal color calibration. This process
should take approximately 90 seconds.
l No action is required.
CANCELING JOB
The printer is canceling the current print job. Incoming data for the
current job will be discarded.
No action is required.
www.GovTechMedia.com
