166 Chapter 9 Image quality EN
3 Press SELECT to save the value. An asterisk (*) displays next to the
selected setting.
Step 3: Adjust the magenta (M) density setting
Examine the magenta density bar (M). If the center oval matches the
background pattern more than the other ovals, the magenta density
does not need to be adjusted and you should continue with the next
step. If not, use the following steps to adjust the density:
1 Press I
TEM until MAGENTA DENSITY displays.
2 Press the right side of the VALUE key to increase the value, or press
the left side to decrease it, until the number corresponding to the
oval that most closely matches the background pattern is displayed.
3 Press S
ELECT to save the value. An asterisk (*) displays next to the
selected setting.
Step 4: Adjust the yellow (Y) density setting
Examine the yellow density bar (Y). If the center oval matches the
background pattern more than the other ovals, the yellow density does
not need to be adjusted and you should continue with the next step. If
not, use the following steps to adjust the density:
1 Press I
TEM until YELLOW DENSITY displays.
2 Press the right side of the VALUE key to increase the value, or press
the left side to decrease it, until the number corresponding to the
oval that most closely matches the background pattern is displayed.
3 Press S
ELECT to save the value. An asterisk (*) displays next to the
selected setting.
Step 5: Adjust the black (K) density setting
Examine the black density bar (K). If the center oval matches the
background pattern more than the other ovals, the black density does
not need to be adjusted and you should continue with the next step. If
not, use the following steps to adjust the density:
1 Press I
TEM until BLACK DENSITY displays.
www.GovTechMedia.com
