58 Chapter 2 Service tools EN
The left-side margin setting is tray dependent. Tray 1 has its own
number while Trays 2 and 3 are combined. The procedure is the same
as the top margin with one exception. The page must be printed from
the tray that will be adjusted.
Printing from Tray 1:
1 Press the I
TEM key until PRINT REGISTRATION PAGE TRAY = 1
(default) is displayed.
2 Press the S
ELECT key.
3 Measure from the left side of the paper to the lines and find the line
that is 13 mm (0.5 in) from the edge of the paper.
If the number for the line is different then the current number:
1 Press the I
TEM key until TRAY 1 LEFT MARGIN = # is displayed.
2 Press the + VALUE - key to change the number to the number
required.
3 Press the S
ELECT key.
Printing from Tray 2 and 3:
1 Press the I
TEM key until PRINT REGISTRATION PAGE TRAY = 2 or 3
is displayed.
2 Press the S
ELECT key.
3 Measure from the left side of the paper to the lines and find the line
that is 13 mm (0.5 in) from the edge of the paper.
If the number for the line is different then the current number:
1 Press the I
TEM key until TRAY 2 AND 3 LEFT MARGIN = # is
displayed.
2 Press the + V
ALUE - key to change the number to the number
required.
3 Press the S
ELECT key.
www.GovTechMedia.com
