5-12 Menus
printer will finish curing any printed areas before skipping
white space.
• Head Height off Media — automatically raises the rail to set
the printhead clearance from the media, at the height you
specify. A lower height reduces overspray, but increases the
chances for a head strike on the media. Bidi calibration is
automatically adjusted for changes in this value.
• Eject Sheets to Input Side — after printing, reverses the
media feed and ejects the printed sheet out the input side.
This makes it possible for the operator to perform all opera-
tions on the input side of the printer, and makes the work-
flow for two-sided printing more efficient. (Two-sided printing
of Stored Jobs always ejects out the output side. See
“Stored Jobs” on page 2-11 for details.)
• Purge Type — Select Low Volume to clear most jet-outs, or
High Volume to clear stubborn jet-outs (default, expels more
ink).
• Measure Media — for cut-sheet media, you can choose var-
ious levels of precision for finding the left (user end), right
(service end), and front edges of the media.
• Minimal — measures the width of the media once and
finds the front right edge; no skew detection
• Standard — measures the width of the media once, and
finds the front edge in two places to estimate skew
• One Edge — measures the user- and service-end edges
on the first sheet, user-end edge only on subsequent
sheets, and the front right edge (no skew detection). For
single-sheet jobs only, not available for multi-sheet N-UP.
Works best on jobs with wider margins.
• Maximal — measures the width of the media in two
places to estimate skew
Choose Minimal for fastest throughput, Maximal for greatest
precision and skew detection when printing edge-to-edge.
• Quality Check — determines how AutoTune errors are
handled (see page 4-4).
• Sleep Wait Time — sets the period of time to wait for a print
job before going into Sleep mode (see page 5-4).
• Expert/Novice Messages — Novice mode presents an
ATTN (Attention) key with Warnings (alerts that do not pro-
hibit printing) and Actions (conditions that require user inter-
