Chapter 3
Kodak ESP 9 Printer User Guide 27
Configuring basic wireless (WiFi) settings
1 From the control panel, press Menu.
2 Press
until Network Settings is selected, and then press OK.
3 If you see the setting displaying the message:
Turn WiFi Radio On, press OK now.
4 As needed, press
, , or to view or configure an item, and then press OK.
Network Settings options
If the printer has not been configured to connect to the WiFi network or the printer WiFi
radio is turned off, the LCD display displays the options below:
WiFi Setup Wizard
Review the procedures below and use the one that suits your network setup.
Connecting to a listed network
1 Complete Steps 1 and 2 of “Configuring basic wireless (WiFi) settings” on page 27.
2
WiFi Setup Wizard is the first option; press OK to select it.
3 The printer searches for available WiFi networks within range; then displays the list in
alphabetical order on the LCD. The illustration below shows an example list. The row
containing each <Network name> listed also shows the strength of the signal (shown
below as xx%) as a percentage between 0 and 100, where 100 is the highest possible
strength.
• If more WiFi networks are within range than can be shown on the LCD, the display
includes the
(page down) symbol and/or the (page up) symbol on the LCD.
Note: You will need to know the network name (SSID) of the WiFi network, and
its security string to connect your printer to the network successfully.
Caution: If there is an Ethernet cable plugged in to the Ethernet port on the back
of the printer, unplug it before starting this task.
Menu Options Settings / Action
WiFi Setup Wizard
Press OK to start the Wizard.
Turn WiFi Radio On / Off
Press OK to toggle between the WiFi radio on or off
states.
View Network Configuration
Press OK to view the configuration on the LCD display.
Print Network Configuration
Press OK to print the network configuration.
Manual IP Address
Press OK to display the Manual IP Address menu.
Note: The WiFi radio is turned on automatically when WiFi Setup Wizard is
selected.
