B – Command Line Interface
Show Perf Command
B-84 59043-03 A
D
errors [port_number]
Displays continuous error counts for the set of 16 ports (0–15, 16–31, ...) that
include [port_number]. If you omit [port_number], ports 0–15 are displayed. Type
“q” and press the Enter key to stop the display.
Examples The following is an example of the Show Perf command:
SANbox2 #> show perf 63
Port Bytes/s Bytes/s Bytes/s Frames/s Frames/s Frames/s
Number (in) (out) (total) (in) (out) (total)
------ ------- ------- ------- -------- -------- --------
48 0 0 0 0 0 0
49 0 0 0 0 0 0
50 0 0 0 0 0 0
51 0 0 0 0 0 0
52 0 0 0 0 0 0
53 0 0 0 0 0 0
54 0 0 0 0 0 0
55 0 0 0 0 0 0
56 0 0 0 0 0 0
57 0 0 0 0 0 0
58 0 0 0 0 0 0
59 0 0 0 0 0 0
60 47M 23K 47M 23K 726 24K
61 0 0 0 0 0 0
62 23K 47M 47M 726 23K 24K
63 0 0 0 0 0 0
The following is an example of the Show Perf Byte command:
SANbox2 #> show perf byte 63
Displaying bytes/sec (total)... (Press 'q' and the ENTER key to stop display)
48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
--------------------------------------------------------------------------------
0 0 0 0 0 0 0 0 31M 0 31M 0 46M 0 46M 0
0 0 0 0 0 0 0 0 31M 0 31M 0 47M 0 47M 0
0 0 0 0 0 0 0 0 31M 0 31M 0 47M 0 47M 0
0 0 0 0 0 0 0 0 31M 0 31M 0 46M 0 46M 0
0 0 0 0 0 0 0 0 31M 0 31M 0 47M 0 47M 0
0 0 0 0 0 0 0 0 31M 0 31M 0 47M 0 47M 0
0 0 0 0 0 0 0 0 31M 0 31M 0 46M 0 46M 0
0 0 0 0 0 0 0 0 31M 0 31M 0 47M 0 47M 0
0 0 0 0 0 0 0 0 31M 0 31M 0 47M 0 47M 0
q
