154 Connection Examples for a Multipoint Videoconference
Connection Examples for a Multipoint
Videoconference
Installing the optional PCS-323M1 H.323MCU software in one
Communication Terminal allows you to conduct a multipoint videoconference
among up to six points.
If the Communication Terminal is called from a new remote party during a
point-to-point videoconference, it can shift to a multipoint conference
automatically (“On the fly” feature).
For a multipoint videoconference, only the Communication Terminal in which the PCS-
323M1 H.323 MCU software has been installed is used as main terminal. If you want
to use multiple Communication Terminals as main terminals depending on the type of
conference, the same number of H.323 MCU software as that of the main terminals is
required.
Using the LAN Connection (Up to 6 Points)
Note
DC 19.5V
AUDIO OUT
AUDIO IN
AUX1–
VIDEO IN
–AUX2
CAMERA UNIT MIC
(PLUG IN POWER)
(MIXED)
AUX
MAIN
–
MONITOR
–
SUB
VIDEO OUT
RGB OUT
IR OUT
100BASE-TX
10BASE-T
12
1 2
ISDN UNIT
WHITE
BOARD
DSB
TERMINAL VISCA OUT
ON LINE POWERLAN ALERT
ON LINE POWERLAN ALERT
ON LINE POWERLAN ALERT
ON LINE POWERLAN ALERT
ON LINE POWERLAN ALERT
LAN
PCS-323M1
H.323 MCU
software
to 100BASE-TX/
10BASE-T UTP cable (category 5, straight)
(not supplied)
to LAN
