![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/c/60/c6090ff1-d580-451e-a895-687cd898b0ad/c6090ff1-d580-451e-a895-687cd898b0ad-bg27.png)
39Registering Local Information
Chapter 2: Registration and Setup for System Administrators
This chapter describes the registration and
settings to be carried out by the system
administrator.The chapter is intended to be
read by the system administrator.
Registering Local
Information
Before starting a conference, register the
required information on the local terminals
of the system using the Setup menu for
administrator. This section describes how to
display the Setup menus for the
administrator and gives a introduction to the
menus.
1 Press the MENU button on the
Remote Commander, or use the V, v,
B or b button to select “MENU” in the
launcher menu, then press the PUSH
ENTER button.
The initial Setup menu appears on the
monitor screen.
2 Keep the MENU button pressed.
The Setup menu for the administrator
appears on the monitor screen.
You can also display the Setup menu for
the administrator by pressing the numeric
button 9 on the Remote Commander twice
while the initial Setup menu (shown in step
1) or the screen in communication is
displayed.
Choosing the following items from the
Setup menu for Administrator opens the
respective menus.
Dial: Dial Setup menu (see page 40)
Answer: Answer Setup menu (see page
43)
General: General Setup menu (see page
45)
Audio: Audio Setup menu (see page 48)
LAN: LAN Setup menu (see page 50)
Administrator: Administrator Setup
menu (see page 53)
ISDN: ISDN Setup menu (see page 54)
Multipoint: Multipoint Setup menu (see
page 57)
Information: Machine Information
menu (see page 59)
Status: Status menu (see page 60)
Encryption via LAN: Encryption via
LAN menu (see page 61)
SIP: SIP Setup menu (see page 62)
3 Use the V, v, B or b button on the
Remote Commander to select the
menu you want to set, then press the
PUSH ENTER button.
Chapter 2:
Registration and
Setup for System
Administrators
Opening the Setup Menu for
the Administrator
Auto
Multipoint Mode
Keep pressing the [MENU] button to show
more detailed setup menus.
Sound Priority
Video/Audio
Setup
Save Cancel
Note
Dial
Multipoint
General
ISDN
Information
Answer
Audio
Administrator
LAN
Status
Setup
Encryption via LAN SIP