48 Registering Local Information
AUX1
Enter the label to be displayed when
“AUX1” (equipment connected to the
VIDEO IN AUX1 on the Communication
Terminal) is selected in the Video Input
Select menu.
AUX2
Enter the label to be displayed when
“AUX2” (equipment connected to the
VIDEO IN AUX2 on the Communication
Terminal) is selected in the Video Input
Select menu.
The Audio Setup menu is used to set various
audio items.
Page 1/2
The level meter indicating the audio input
level is displayed.
Input Select
Selects the sound to be input.
MIC: Inputs the sound of the microphone.
AUX: Inputs the sound from external
equipment.
MIC+AUX: Inputs both sounds from the
microphone and external equipment.
Mic Select
Selects the microphone to be used.
Internal: Uses the built-in microphone.
External: Uses the microphone connected
to the Communication Terminal.
DSB MIC: Uses the microphone connected
to the Data Solution Box.
CTE
Selects the input to which the CTE-600
Communication Transducer is connected.
Off: Does not use the CTE-600
Communication Transducer.
AUX: Inputs from the AUDIO IN jack on
the Communication Terminal.
DSB AUX IN: Inputs from the AUX IN jack
on the Data Solution box.
Echo Canceler
Selects whether you use the echo canceler.
Internal: Enables the built-in echo canceler.
External: Uses the echo canceler of the
external equipment connected.
The input from the AUDIO IN jack on
the Communication Terminal is always
Audio Setup Menu
Page: 1/2
Audio Setup
Input Select
Internal
MIC
Mic Select
Off
CTE
Off
Lip Sync
On
Recording Mute
Save Cancel
Internal
Echo Canceler
