33Setting Up the System for the First Time — Initial Setup Wizard
Chapter 1: Installation and Preparation
When you use the PCS-B384 ISDN unit
and connect 2 or 3 ISDN lines, enter the
sub-addresses in the B1 to C2 text boxes in
addition to the A1 and A2 boxes.
When you use the PCS-B768 and connect
2 to 6 ISDN lines, enter the sub-addresses
in the B1 to F2 text boxes in addition to the
A1 and A2 boxes. To open the menu with
these text boxes, select “Next”, then press
the PUSH ENTER button.
10Use the V, v, B or b button to select
“Next”, then press the PUSH ENTER
button.
For customers in other countries than
the USA and Canada
The LAN Setup Wizard appears.
For customers in the USA and
Canada
The ISDN Setup Wizard (SPID menu)
appears.
Set the SPID items, then select “Next”
and press the PUSH ENTER button.
The LAN Setup Wizard appears.
For details on the SPID settings, see
“SPID Setting for Customers in the USA
and Canada” on page 56.
When you do not use the LAN, select
“Next” to display the message window for
confirmation, then proceed to step 13.
11Set the following items on the LAN.
DHCP Mode: Sets the DHCP
(Dynamic Host Configuration
Protocol).
Auto: Automatically assigns your IP
address, network mask, gateway
address and DNS address.
Off: Deactivates DHCP. In this case
set your IP address, network mask,
gateway address and DNS address
manually.
Host Name: Enter your host name.
IP Address: Enter your IP address.
Network Mask: Enter your network
mask.
Gateway Address: Enter your default
gateway address.
DNS Address: Enter your DNS
(Domain Name System) server
address.
When you set “DHCP Mode” to “Auto”,
the assigned IP address is shown in the
launcher menu (page 70) or Machine
Information menu (page 59).
When you do not know how to set up the
LAN configuration, contact your
network administrator.
12Use the V, v, B or b button to select
“Next”, then press the PUSH ENTER
button.
The message window for confirmation
appears.
13Use the V, v, B or b button to select
“Save”, then press the PUSH ENTER
button.
The settings are saved.
To cancel the setting
Press the V, v, B or b button to select
“Cancel”, then press the PUSH ENTER
button.
To go back to the previous wizard
Press the
V, v, B or b button to select
“Previous”, then press the PUSH ENTER
button.
Note
Note
LAN Setup Wizard
CancelNextPrevious
Off
DHCP Mode
Host Name
IP Address
Network Mask
Gateway Address
DNS Address
. . .
. . .
. . .
. . .
Note
CancelPrevious
Save
