(109 intentionally excluded)
5-26 Diagnostic Tests
113 Disk Drive Test (Continuous Loop)
This test reads data directly from the drive selected. It checks the seek function, cycle
redundancy, parity, checksum, directory and allocation table integrity, and disk format.
1 Go to: 113
2 Insert a diskette or diskettes in the diskette drive or drives you wish to test.
3 Press: READY to run the test. “0” appears on the display indicating the A: drive.
4 Press: CANCEL to advance to the drive you wish to test. Table 5-27, “Disk Drive Test
Drive Indications,” on page 5-25 lists the drive indications.
5 Press: READY to activate the drive.
6 If an error code appears, look it up in Table 2-8, “IGS/Disk Drive Error Codes,” on
page 2-7, to determine which TAG to follow.
7 Power-on-reset to exit.
