105
www.honeywell.com/sensing
LINEAR AND ROTARY POSITIONINDEX
TH100 Series
The TH-100 Series puts Honeywell’s proven variable-resistor technology to
work in angle-management applications such as control-lever sensing and
equipment position feedback. High performance and low cost make it
attractive for a wide range of applications. Special electrical and mechanical
configurations, including dual tracks, D-shape rotor holes, etc. are available on
special order.
The device provides for angle measurements, has 152,4 mm (6.0 in) wire
leads, a 6,35 mm (0.25 in) slotted thru hole and is sealed.
Power rating: 0.5 W max.
Element type: Conductive plastic
Terminal type: three 20 AWG
Shaft: 6,35 mm (0.25 in) thru hole with .105 w x .090 d slot
Body: 38,1 mm (1.5 in) x 45,72 mm (1.8 in)
Electrical taper: Linear
Storage & operating temperature: -40 °C to 120 °C (-40 °F to 248 °F)
Working voltage (max): 350 Vdc
Linearity: ± 5% standard; to ± 1% special
Total resistance: 10 K
Total resistance tolerance: ± 15%
Rotational cycles: > 1 million
OPTIONS
180° Rotation
TAPER CABLE CONNECTOR REFERENCE
Linear No 640CS103A06NAAY
90° Rotation
TAPER CABLE CONNECTOR REFERENCE
Linear No 640ES103A06NAAY
HRS100 Series, Hall-effect
The HRS100 provides angular position information for a variety of sensing
and control applications in the automotive, marine, truck, off-road, industrial
implementation, aerospace, and rail industries. The use of magnetically
coupled information in place of a mechanical wiper assembly provides a long
life, cost-effective solution for harsh environments that include temperature,
vibration, dither, moisture and dirt.
This position sensor incorporates Hall-effect to provide a sensing device that
will last for more than 50 million operations. The device is packaged in a metal
housing with a 9,5 mm (0.375 in) diameter bushing and a
6,35 mm (0.25 in) diameter slotted shaft and solder lug terminals.
Terminal type: Straight solder lug
Bushing: 9,52 mm (.375 in) FMS, includes C-ring
Shaft: Slotted 6,32 mm ± 0,03 (0.249 in ± 0.001)
Body: 27,79 mm (1.094 in) Ø
Electrical taper: Linear
Operating temperature: -40 °C to 85 °C (-40 °F to 185 °F)
Supply voltage (max): 5 Vdc
Linearity: ± 2%
Rotational cycles: 10 million
Mechanical operating angle: 90°
3.3 [0.13]
2,84 [0.12]
13,2 [0.52]
20,32 [0.08]
9,53 [0.375]
Mounting Surface
27,69 [1.09]
2,23 [0.875]
GRD VDD
Output
19,05 [0.75]
OPTIONS
90° Rotation
SHAFT LUG REFERENCE
Slotted Straight Solder HRS100SSAB090
Clarostat Rotary Position Transducers
