139
www.honeywell.com/sensing
PRESSURE SENSORS
OPTIONS
VF 1/4 in Female Face Seal
Bendix Male Connector
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Compound -14.7 psig to 100 psig S14VFV100CB
VM 1/4 in Male Face Seal
Bendix Male Connector
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Compound -14.7 psig to 100 psig S14VMV100CB
Compound -14.7 psig to 250 psig S14VMV250CB
VM 1/4 in Male Face Seal
1,83 m (6 ft) 2-Conductor Cable
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Gauge 0 psi to 3,000 psi S14VM3000GP
Compound 0 psi to 3,000 psi S14VMV3000CP
VS 1/4 in Male Face Seal, Swivel
Bendix Male Connector
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Compound -14.7 psig to 100 psig S14VSV100CB
Compound -14.7 psig to 250 psig S14VSV250CB
Compound -14.7 psig to 100 psig S14VSV1755BCB
Compound -14.7 psig to 100 psig S14VSV210BCB
Compound -14.7 psig to 100 psig S14VSV70BCB
Compound -14.7 psig to 100 psig S14VSV7BCB
VS 1/4 in Male Face Seal, Swivel
1,83 m (6 ft) 2-Conductor Cable
MEASUREMENT TYPE PRESSURE RANGE REFERENCE
Compound -14.7 psig to 100 psig S14VSV210BCP
Compound -14.7 psig to 100 psig S14VSV70BCP
S1 Series
All S1 pressure transducers are manufactured in our Class 10
clean room environment. Our single port pressure
transducers are specifically designed for the semiconductor industry. Their
long life, coupled with long-term stability, can greatly reduce or eliminate the
need for zero and span adjustments. All Honeywell transducers are CE
certified with EMI/RFI protection and are manufactured to an electropolished
wetted surface finish of 5 micro in Ra maximum.
Approvals: CE, FM
Supply voltage: 12.0 Vdc to 36.0 Vdc
Signal conditioning: Amplified compensated
Operating temperature range: -40 °C to 85 °C (-40 °F to 185 °F)
Compensated temperature range: 0 °C to 70 °C (32 °F to 158 °F)
Output type: 4 mA to 20 mA
1/4" male swivel
106,7 max.
(0.93)
30,4
(1.20)
(4.20)
23,6
20,3
(0.80)
with pigtail
1/4" female face seal
(0.93)
30,4
(1.20)
23,6
1/4" tube stub
0.035 typ.
(0.93)
10,9
(0.43)
23,6
116,9 max.
1/4" male swivel
23,6
(0.93)
20,3
(0.80)
(4.60)
67,5 typ.
(2.74)
30,4
.80 across flats typ.
(1.20)
.30 typ
with Bendix
1/4" male face seal
(0.93)
15,4
(0.61)
23,6
Fitting Options
