5: Commands and Levels
XPort Pro Command Reference 100
Displays the last 20 commands entered during the current
CLI session.
Prevents ICMP packets from being sent or received.
Allows ICMP packets to be sent and received.
Stores the current configuration in permanent memory.
if 1 (config-if:eth0) level commands
default gateway <ip address>
Sets the configurable gateway IP address to the default
value.
Restores the default Maximum Transmission Unit (MTU)
size.
dhcp client id binary <binary>
Sets the client id allowing binary characters.
Within [] use binary decimal up to 255 or hex up to 0xFF.
dhcp client id set <text>
Sets the client id in text format.
domain <text>
Sets the domain name.
<text> = name of the domain.
Exits to the config level.
Sets the host name.
<text> = name of the host.
ip address <ip address/cidr>
Sets the IP address and network mask.
Formats accepted:
192.168.1.1 (default mask)
192.168.1.1/24 (CIDR)
"192.168.1.1 255.255.255.0" (explicit mask)
Enter link configuration level
<bytes>
Sets the Maximum Transmission Unit (MTU) size.
Clears the default gateway.
Clears the DHCP client ID.
Clears the name of the primary DNS server.
Clears the name of the secondary DNS server.
Sets the IP address of the primary DNS server.
secondary dns <ip address>
Sets the IP address of the secondary DNS server.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Stores the current configuration in permanent memory.
ip (config-ip) level commands
Continuously shows IP statistics
