5: Commands and Levels
XPort Pro Command Reference 53
Enters the query port level.
Change to menu level for RSS configuration and status
Displays system information.
Displays the last 20 commands entered during the current
CLI session.
Changes to the command level for SMTP configuration
and status.
Changes to the command level for TCP configuration and
status.
terminal <line>
Enters the configure-terminal level.
<line> = number of the terminal line (serial port) to be con-
figured.
Enters the configure-terminal level for the network.
Changes to the command level for UDP configuration and
status.
Change to menu level for VIP configuration and status
Stores the current configuration in permanent memory.
connect (tunnel-connect:1) level commands
Forwards (tunnels) network data in connect mode tunne-
ling.
block network enable Discards all data coming in from the connect mode tunnel
before forwarding
it to the serial interface (generally used for debugging).
Forwards (tunnels) serial data in connect mode tunneling.
Discards all data coming in from the serial interface before
forwarding
it to the connect mode tunnel (generally used for debug-
Enables the tunneling server to always establish tunneling
connections.
connect mode any character Enables the tunneling server to establish a tunneling con-
nection when a
character is received on the corresponding line (serial
Disables connect mode tunneling.
connect mode modem control asserted Enables the tunneling server to make tunneling connec-
tions when the modem
connect mode modem emulation
Enables modem emulation for connect mode tunneling.
connect mode start character
Enables connect mode tunneling when the configured start
character
Enters the next lower level.
Restores the default connect mode as "disable".
default host mode Connects to the first host in the list that accepts the con-
Uses a random port number as the local port for establish-
ing tunneling
