A SERVICE OF

logo

Open as PDF
next previous
5: Commands and Levels
XPort Pro Command Reference 58
auto show tlog
Continuously displays the internal trouble log.
auto show upload
Continuously displays the status of firmware upload.
clrscrn
Clears the screen.
default long name
Restores the default product long name.
default short name
Restores the default product short name.
dhrystone
Runs the Dhrystone benchmark program.
exit
Exit to the enable level.
long name <name>
Sets the product long name, displayed in command mode
and the Web interface.
short name <name>
Sets the product short name, displayed in command mode
and the Web interface.
<name> = maximum of eight characters.
show
Show system information
show buffer pool
Displays information about the various buffer pools.
show codefile memory
Displays memory utilization by code files.
show debug
Displays debug information.
show delta memory Displays differences in memory utilization by code files or
line reference.
show hardware information
Displays information about the hardware.
show history Displays the last 20 commands entered during the current
CLI session.
show linereference memory <code filename>
Displays memory utilization by line reference for one code
file.
show memory
Displays current memory usage information.
show task memory
Displays task memory utilization.
show task state
Displays current task states.
show tlog
Displays the internal trouble log.
show upload
Displays the status of firmware upload.
show xport_pro
Show system information
write
Stores the current configuration in permanent memory.
diagnostics (config-diagnostics) level commands
clrscrn
Clears the screen.
exit
Returns to the config level.
log
Enters the next lower level.
show
Displays the current configuration.
show history Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
disconnect (tunnel-disconnect:1) level commands
clrscrn
Clears the screen.
exit
Returns to the tunnel level.
flush serial disable
Does not flush serial data upon closing a tunneling con-
nection.
flush serial enable
Flushes serial data buffer when a tunneling connection is
closed.
flush stop character disable
Forwards the stop character from the Line to the network.
flush stop character enable
Prevents the stop character from the Line from being for-
warded to the network.