A SERVICE OF

logo

Open as PDF
next previous
5: Commands and Levels
XPort Pro Command Reference 51
A decimal value character has the form \99.
A hex value character has the form 0xFF.
tcp keep alive <milliseconds>
Enables TCP keep alive for accept mode tunneling and
sets the timer.
<milliseconds> = timer value, in milliseconds.
write
Stores the current configuration in permanent memory.
arp (config-arp) level commands
add <ip address> <MAC address>
Adds an entry to the ARP table, mapping an IP address to
a MAC address.
<ip address> = IP address to be mapped.
<mac address> = MAC address in colon-separated form.
clrscrn
Clears the screen.
default timeout
Restores the default ARP cache timeout.
exit
Exits to the configuration level.
remove all
Removes all entries from the ARP cache.
remove ip <ip address>
Removes an entry from the ARP cache.
<ip address> = address of the entry being removed.
show
Displays the current configuration.
show cache
Displays the ARP cache table.
show history
Displays the last 20 commands entered during the current
CLI session.
timeout <seconds>
Sets the ARP cache timeout.
<seconds> = ARP cache timeout in seconds.
write
Stores the current configuration in permanent memory.
cli (config-cli) level commands
clrscrn
Clears the screen.
default inactivity timeout
The default inactivity timeout will apply to CLI sessions.
default quit connect line
Restores the default string used to quit the "connect line
<line>" command.
enable level password <text>
Sets the enable-level password.
exit
Exits to the configuration level.
inactivity timeout
<minutes>
Sets the inactivity timeout for all CLI sessions.
login password <text>
Sets the CLI login password.
no enable level password
Removes the enable-level password.
no inactivity timeout
No inactivity timeout will apply to CLI sessions.
no login password
Removes the CLI login password.
quit connect line <control>
Sets the string used to quit the "connect line <line>" com-
mand.
The characters may be input as text or control.
A control character has the form <control>C.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
ssh
Change to menu level for SSH configuration and status.
telnet
Change to menu level for Telnet configuration and status.
write
Stores the current configuration in permanent memory.
client (ssh-client) level commands
clrscrn
Clears the screen.
default user <username> command
Restore the user command to the default login shell