5: Commands and Levels
XPort Pro Command Reference 57
Displays the last 20 commands entered during the current
CLI session.
Stores the current configuration in permanent memory.
Adds the specified CP to the specified group.
<cp> = configurable pin.
<group> = the name
of the group to which you want to add
the CP.
add <cp> to <group> <bit>
Adds a specified CP to a specified group at a specified bit
position.
<cp> = configurable pin.
<group> = the name of the group to which you want to add
the CP.
Creates a configurable pin (CP) group.
<group> = the name for the new group.
Removes a CP from a specified group and sets the CP to
its default
configuration of input.
<cp> = configurable pin.
<group> = the name of the group.
delete <group>
Removes a group and resets all CPs in that group to the
default
configuration of input.
<group> = the name of the group.
<group>
Disables the specified group.
<group> = the name of the group.
Enables a disabled group.
<group> = the name of the group.
Exits to the enable level.
Displays the value of the specified group.
<group> = the name of the group.
Configures a CP as an asserted high input.
<cp> = configurable pin.
set <cp> as input assert low
Configures a CP as an asserted low input.
Configures a CP as an asserted high output.
<cp> = configurable pin.
set <cp> as output assert low
Configures a CP as an asserted low output.
<cp> = configurable pin.
set <group> <value>
Assigns a value to the specified group.
<group> = the name of the group.
<value> = numeric value to assign to the CP group. Can
be specified as hex
Displays group information for specified group.
<group> = the name of the group.
Displays configuration and group information for all CPs.
Displays all groups defined and their state.
Displays the last 20 commands entered during the current
CLI session.
Stores the current configuration in permanent memory.
device (device) level commands
