Lantronix 900-558 Manual

A SERVICE OF

next previous

5: Commands and Levels

XPort Pro Command Reference 49

Table 5-1 Commands and Levels

accept (tunnel-accept:1) level commands

accept mode always

Enables the tunneling server to always accept tunneling

connections.

accept mode any character

Enables the tunneling server to accept tunneling connec-

tions only when a

character is received through the corresponding line

(serial

port).

accept mode disable

Disables accept mode tunneling.

accept mode modem control asserted

Enables the tunneling server to accept tunneling connec-

tions when the modem

control pin is asserted.

accept mode modem emulation

Enables modem emulation for accept mode tunneling.

accept mode start character

Enables accept mode tunneling when the configured start

character

is received on the line.

aes decrypt key

<hexadecimal>

Sets the accept tunnel AES decrypt key with up to 16

bytes.

Each byte is represented by two adjacent hex digits.

Bytes may run together or be separated by optional punc-

tuation:

123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc

Note that quotes must enclose the value if it contains

spaces.

aes decrypt key text <text>

Sets the accept tunnel AES decrypt key with up to 16

bytes.

Each byte is represented by a single character.

Note that quotes must enclose the value if it contains

spaces.

aes encrypt key <hexadecimal>

Sets the accept tunnel AES encrypt key with up to 16

bytes.

Each byte is represented by two adjacent hex digits.

Bytes may run together or be separated by optional punc-

tuation:

123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc

Note that quotes must enclose the value if it contains

spaces.

aes encrypt key text <text>

Sets the accept tunnel AES encrypt key with up to 16

bytes.

Each byte is represented by a single character.

Note that quotes must enclose the value if it contains

spaces.

block network disable

Forwards (tunnels) network data in accept mode tunneling.

block network enable

Discards all data coming in from the accept mode tunnel

before forwarding

it to the serial interface (generally used for debugging).

block serial disable

Forwards (tunnels) serial data in accept mode tunneling.

block serial enable

Discards all data coming in from the serial interface before

forwarding

it to the accept mode tunnel (generally used for debug-

ging).

clrscrn

Clears the screen.

cp output

Enters the next lower level.

default accept mode

Restores the default accept mode as "always".