5: Commands and Levels
XPort Pro Command Reference 99
%B bytes sent excluding headers (0 = '-')
%h remote host (same as %a)
%{h}i header contents from request (h = header string)
%m request method
%p ephemeral local port value used for request
%q query string (prepend with '?' or empty '-')
%t timestamp HH:MM:SS (same as Apache
'%(%H:%M:%S)t')
%u remote user (could be bogus for 401 status)
%U URL path info
%r first line of request (same as '%m %U%q <version>')
Disables HTTP server logging.
Enables HTTP server logging.
Sets the maximum number of bytes the HTTP server ac-
cepts when receiving
Sets the maximum number of HTTP server log entries.
<number> = maximum number of HTTP server log entries.
max timeout <seconds>
Sets the maximum time the HTTP server waits when re-
ceiving a request.
<seconds> = maximum timeout value.
Restores the HTTP counters to the aggregate values.
Disables the HTTP Server port.
Disables the HTTP Server SSL port.
Sets the port number the HTTP server will use.
<number> = port number.
<number>
Sets the port number the HTTP server will use over SSL.
secure protocols ssl3 disable
secure protocols ssl3 enable
secure protocols tls1.0 disable
secure protocols tls1.0 enable
secure protocols tls1.1 disable
secure protocols tls1.1 enable
Displays the current configuration.
Displays the HTTP server authentication settings.
Displays the last 20 commands entered during the current
CLI session.
Displays the HTTP server log.
Displays the HTTP statistics.
Disables the HTTP server.
Stores the current configuration in permanent memory.
icmp (config-icmp) level commands
Continuously shows ICMP statistics
Exits to the configuration level.
Displays the current configuration.
