ANALYTICAL METHODS FOR TEXTILE COMPOSITES
6-12
6.17 Z. C. Xia and J. W. Hutchinson, "Mode II Fracture Toughness of a Brittle Adhesive Layer,"
Int. J. Solids Structures
, 1133-1148 (1994).
6.18 W. S. Slaughter, N. A. Fleck, and B. Budiansky, “Compressive Failure of Fiber Composites: The
Roles of Multiaxial Loading and Creep,” J. Engng Mater. Tech. 115, 308-13 (1993).
6.19 N. A. Fleck and P. M. Jelf, “Deformation and Failure of a Carbon Fibre Composite under
Combined Shear and Transverse Loading,” Acta Metall. Mater. 43[8], 3001-7 (1995).
6.20 S. W. Tsai and H. T. Hahn, Introduction to Composite Materials, Technomic Publishing
Company, Westport, Connecticut, 1980. Chapter 7.
6.21 S. R. Swanson and L. V. Smith, “Multiaxial Stiffness and Strength Characterization of 2-D Braid
Carbon/Epoxy Fiber Composites,” in Mechanics of Textile Composites Conference, Hampton,
Virginia, December, 6-8, 1994, ed. C. C. Poe, Jr., NASA Conference Publication 3311 (NASA,
1995).
6.22 K. S. Chan, M. Y. He, and J. W. Hutchinson, "Cracking and Stress Redistribution in Ceramic
Layered Composites," Mater. Sci. Engng A167, 57-64 (1993).
6.23 A. Hillerborg, “Analysis of One Single Crack,” Fracture Mechanics of Concrete, ed. F. H.
Wittman (Elsevier Science Publishers, Amsterdam, 1983) pp. 223-49.
6.24 R. M. L. Foote, Y.-W. Mai, and B. Cotterell, “Crack-Growth Resistance Curves in Strain
softening Materials,” J. Mech. Phys. Solids 34, 593-607 (1986).
6.25 Z. P. Bazant, ed., Fracture Mechanics of Concrete Structures (Elsevier Applied Science, London,
1992).
6.26 B. N. Cox and D. B. Marshall, “Concepts for Bridged Cracks in Fracture and Fatigue,” Acta
Metall. Mater. 42[2], 341-63 (1994).
6.27 T. H. Walker, L. B. Ilcewicz, D. R. Polland, and C. C. Poe, Jr., “Tension Fracture of Laminates
for Transport Fuselage - Part II: Large Notches,” Third NASA Advanced Composite Technology
Conference, NASA CP-3178 (NASA, 1992). pp. 727-758.
