GS-4012F/4024 User’s Guide
Chapter 40 Introducing the Commands 252
route <ip> <mask>
Removes a specified IP static
route.
route <ip> <mask>
inactive
Enables a specified IP static
route.
lacp
Disables the link aggregation
control protocol (dynamic
trunking) on the switch.
logins
Disables login access to the
specified name.
mac-filter name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src|dst|both>
inactive
Enables the specified MAC-filter
rule.
name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src|dst|both>
Disables the specified MAC
filter rule.
mac-forward name <name> mac
<mac-addr> vlan
<vlan-id>
interface
<interface-id>
Removes the specified MAC
forwarding entry, belonging to a
VLAN group (if any) forwarded
through an interface(s).
name <name> mac
<mac-addr> vlan
<vlan-id>
interface
<interface-id>
inactive
Enables the specified MAC
address, belonging to a VLAN
group (if any) forwarded through
an interface(s).
mirror-port
Disables port mirroring on the
switch.
multi-login
Disables another administrator
from logging into Telnet or the
CLI.
mvr
Displays MVR on the switch.
policy <name>
Deletes the policy. A policy sets
actions for the classified traffic.
inactive
Enables a policy.
port-access-
authenticator
Disables port authentication on
the switch.
<port-list>
Disables authentication on the
listed ports.
<port-list>
reauthenticate
Disables the re-authentication
mechanism on the listed port(s).
port-security
Disables port security on the
device.
Table 95 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION
