A SERVICE OF

logo

GS-4012F/4024 User’s Guide
Chapter 41 Command Examples 268
CHAPTER 41
Command Examples
This chapter describes some commands in more detail.
41.1 Overview
These are commands that you may use frequently in maintaining your switch.
41.2 show Commands
These are the commonly used show commands.
41.2.1 show system-information
Syntax:
show system-information
This command shows the general system information (such as the firmware version and
system up time).
An example is shown next.
Figure 159 show system-information Command Example
ras> show system-information
System Name :
System Contact :
System Location :
Ethernet Address : 00:13:49:1c:a2:9f
ZyNOS F/W Version : V3.60(TS.2)| 10/11/2005
RomRasSize : 3430448
System up Time : 3:18:31 (122ce8 ticks)
Bootbase Version : V3.0 | 04/08/2005
ras>