A SERVICE OF

logo

Open as PDF
next previous
GS-4012F/4024 User’s Guide
Chapter 41 Command Examples 276
The following example resets both configuration files to the factory default settings.
Figure 172 CLI: Reset to the Factory Default Example
41.7 no Command Examples
These are the commonly used command examples that belong to the no group of commands.
41.7.1 no mirror-port
Syntax:
no mirror-port
Disables port mirroring on the switch.
An example is shown next.
Figure 173 no mirror-port Command Example
41.7.2 no https timeout
Syntax:
no https timeout
Resets the https session timeout to default.
An example is shown next. The session timeout is reset to 300 seconds.
Figure 174 no https timeout Command Example
ras# erase running-config
ras# write memory
ras# write memory 2
ras(config)# no mirror-port
ras(config)# no https timeout
Cache timeout 300