GS-4012F/4024 User’s Guide
253 Chapter 40 Introducing the Commands
<port-list>
Disables port security on the
specified ports.
<port-list> learn
inactive
Enables MAC address learning
on the specified ports.
radius-server
Disables the use of
authentication from the RADIUS
server.
remote-management <index>
Clears a secure client set entry
from the list of secure clients.
<index> service
<telnet| ftp|
http| icmp| snmp|
ssh| https>
Disables a secure client set
entry number from using the
selected remote management
service.
router dvmrp
Disables DVMRP on the switch.
igmp
Disables IGMP on the switch.
ospf
Disables OSPF on the switch.
rip
Disable RIP on the switch.
vrrp network <ip-
address>/<mask-
bits> vr-id <1-7>
Deletes VRRP settings.
service-control ftp
Disables FTP access to the
switch.
http
Disables web browser control to
the switch.
https
Disables secure web browser
access to the switch.
icmp
Disables ICMP access to the
switch such as pinging and
tracerouting.
snmp
Disables SNMP management.
ssh
Disables SSH (Secure Shell)
server access to the switch.
telnet
Disables telnet access to the
switch.
snmp-server trap-destination
<ip>
Disables sending of SNMP
traps to a station.
spanning-tree
Disables STP.
<port-list>
Disables STP on listed ports.
ssh key
<rsa1|rsa|dsa>
Disables the secure shell server
encryption key. Your switch
supports SSH versions 1 and 2
using RSA and DSA
authentication.
known-hosts
<host-ip>
Removes the specified remote
hosts from the list of all known
hosts.
Table 95 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION
