ZyXEL Communications GS-4012F/4024 Manual

A SERVICE OF

next previous

GS-4012F/4024 User’s Guide

83 Chapter 7 Basic Setting

802.1P Priority This priority value is added to incoming frames without a (802.1p) priority queue tag.

See Priority Queue Assignment in Table 10 on page 78 for more information.

BPDU Control Configure the way to treat BPDUs received on this port. You must activate bridging

control protocol transparency in the Switch Setup screen first.

Select Peer to process any BPDU (Bridge Protocol Data Units) received on this port.

Select Tunnel to forward BPDUs received on this port.

Select Discard to drop any BPDU received on this port.

Select Network to process a BPDU with no VLAN tag and forward a tagged BPDU.

Apply Click Apply to save the settings.

Cancel Click Cancel to reset the fields to your previous configuration.

Table 12 Port Setup (continued)

LABEL DESCRIPTION