GS-4012F/4024 User’s Guide
269 Chapter 41 Command Examples
41.2.2 show hardware-monitor
Syntax:
show hardware-monitor [c|f]
This command displays the current hardware status (such as temperature and voltage levels).
The following figure shows an example using degree Celsius as the temperature unit.
Figure 160 show hardware-monitor Command Example
41.2.3 show ip
Syntax:
show ip
This command displays the IP related information (such as IP address and subnet mask) on all
switch interfaces.
The following figure shows the default interface settings.
ras> show hardware-monitor c
Temperature Unit : (c)
Temperature Current MAX MIN Threshold Status
MAC 33.0 34.0 32.0 65.0 Normal
CPU 32.0 32.0 31.0 65.0 Normal
PHY 37.0 37.5 35.5 65.0 Normal
FAN Speed(RPM) Current MAX MIN Threshold Status
FAN1 5958 6009 5908 4500 Normal
FAN2 6061 6114 6009 4500 Normal
FAN3 6222 6222 6114 4500 Normal
FAN4 6061 6114 6009 4500 Normal
Voltage(V) Current MAX MIN Threshold Status
2.5 2.576 2.576 2.576 +/-5% Normal
1.25 1.216 1.216 1.216 +/-10% Normal
3.3 3.360 3.360 3.344 +/-5% Normal
12 12.220 12.281 12.220 +/-10% Normal
5 5.080 5.080 5.080 +/-5% Normal
1.3 1.328 1.328 1.328 +/-5% Normal
1.25 1.248 1.248 1.248 +/-5% Normal
ras>
