ZyXEL Communications 1000 Manual

A SERVICE OF

next previous

IES-1000 User’s Guide

System Commands 5-3

5.4.1 Uptime Command

Syntax:

192.168.1.1> uptime

This command shows the elapsed time the system has been running since the last reboot.

5.4.2 Version Command

Syntax:

192.168.1.1> version

This command shows the system firmware version and date

5.4.3 Restart Command

Syntax:

192.168.1.1> restart

This command instructs the system to perform a warm start, that is, restarting the system without turning the

power off and on.

5.4.4 Passwd Command

Syntax:

192.168.1.1> passwd

This command changes the management password. The management password is used for authentication at

console or Telnet login. This command is only allowed for local console management sessions. The management

password must be from 1 to 8 characters long and any character is accepted. The factory default password is

“1234”.

It is very important that you remember your password. If you forget it, refer to the

Troubleshooting section for help.

5.4.5 Config Print Command

Syntax:

192.168.1.1> config print

This command lists all current system configuration settings.