A SERVICE OF

logo

Open as PDF
next previous
IES-1000 User’s Guide
Remote Management 13-1
This chapter shows you how to manage the IES-1000 remotely.
More often than not, you will have the IES-1000 located remotely making its remote management features very
useful.
13.1 Management by Telnet
After you have set up the IP parameters and connected the IES-1000 to the network, you can manage it remotely
with telnet. You can use any telnet client that you find convenient. The configuration procedures with telnet are
exactly the same as those using the direct connection via the console port. The default password for a telnet
session is “1234”. Although telnet will work while the console port is being used, only one telnet session is
allowed at a time.
13.2 SNMP Management
SNMP (Simple Network Management Protocol) is a protocol used for exchanging management information
between network devices. The IES-1000 supports SNMP versions one and two (SNMPv1 and SNMPv2) agent
functionality, which allows a manager station to manage and monitor it through the network.
The next figure illustrates an SNMP management operation.
Chapter 13
Remote
Management